About this deal
So partly wondering if it’s been in a washing machine, worn surfing or something a long those lines. Durability and clarity are important, but I also realize that this may just be a finish that has to be maintained a bit more scrupulously.
Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).You can also use a nylon pot scrubber or a soft bristled brush to remove the lacquer from hard to crevices and stubborn spots. But just one point (Some thought must be given to any exposure to any direct heat from the fire so the hardness of the lacquer might be important. Copper Back-splashes, Copper Counters, Copper Hoods, Copper Sinks all look great when they are new but will soon lose their luster unless protected. If you are unable to clean the copper then it is most likely that it had been coated with a lacquer or varnish and the tarnish has developed under the old coating.
Rad pipes top out at about 90deg, most condensing systems with suitably sizes rads, more like 65 these days. Which is good because most of the metal cleaning and conditioning materials will change the physical appearance of the metal due to the strength of the acids used.To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.
This is much more resistant to further tarnishing than the active surface left by a chemical cleaner. A friend as asked me to post this on his behalf, he as obtained a second hand copper hood, which after refurbishing, he intends to fit above an electric fire in his lounge. Some lacquers, especially the basic cellulose type, allow tarnishing to take place under the surface of the coating. Some thought must be given to any exposure to any direct heat from the fire so the hardness of the lacquer might be important.Well, I am not an expert on this but as lacquers are a form of plastic coating I would think that it might be affected by direct heat. Used on brass door fittings (fittings had been polished and degreased first) - gave orange peel effect, not a clear coat.
However the coating is delicate until fully cured, which can take up to 3 to 4 weeks depending upon the number of coats applied. As a means of cleaning out old polish from details, they can have their uses but the finish is never as bright as that given by mechanical polishing. Use a former, button stick or other simple jig if it will make life easier and prevent polish going onto surfaces such as walls or clothing where it is not wanted. NEUTRALIZE ACIDS – Acid traces must be removed from the surface otherwise black marks/dark cloudiness will appear under the coating.So I designed and built this copper pipe table and are in the process of now building the wooden top but want to prevent the copper from tarnishing as much as possible. Photo at right shows where the old coating has been removed with a varnish stripper to enable cleaning/polishing.