276°
Posted 20 hours ago

Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming Pool, Hot Tub - LIQUID PATCH Resistant to Fresh and Salt Water UV-Resistant Long-lasting - 40ML

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

How to undertake a professional quality repair of your PVC or Hypalon RIB, inflatable boat and SIB tubes Safety first Item: 125901754467 Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming. How to replace a Leafield Marine A4 inflation/deflation valve older inflatable boats, RIBs, RHIBs and dinghies

Repair Your PVC or Hypalon RIB How to Professionally Repair Your PVC or Hypalon RIB

How to fit a replacement screw-in type inflatable boat, rigid inflatable boat (RIB) or dinghy inflation deflation valve How to identify the fabric of your RIB, inflatable boat, dinghy, life raft or inflatable kayak collar, tube or sponson. Hypalon or PVC?

Tube repairs can be divided into small tears or punctures and larger tears (over 50mm long). Small tears/punctures can be repaired with a single patch to the outside of the tube, larger tears must be repaired by affixing a patch both inside and on the outside of the tube. Remove the masking tape and clean-off any excess adhesive with the MEK solvent. It is important to remove any excess adhesive as if this remains on the surface of your tubes it will turn an unsightly brown! Locate the tear or hole on the tube. If unsure as to where the puncture is located, e.g. you have a ‘slow puncture’, then apply soapy water to the inflated tube and observe any bubbles forming at the puncture. Mark the location, dry the area and deflate the tube. Mask around the repair area on the tube with removable masking tape to prevent unsightly adhesive ‘overspill’ when applying the adhesive. Allow a 2-3mm gap around the pencil/removable marker line to allow for some stretch in the patch when applied. How to clean inflatable boats, protect RIB collars, tubes and sponsons, clean Hypalon and PVC inflatable boat fabric

Dr Boat Heavy Duty Repair Kit for Boat Kayak,Tent, Canoe

How to make an emergency repair using TEAR-AID® Type A to a Hypalon inflatable boat, RIB, raft and other Hypalon / rubber inflatable structuresHow to undertake a professional quality repair of your PVC or Hypalon RIB, inflatable boat and SIB tubes Insert the rolled-up, polythene covered, repair patch into the tube through the tear or cut in the tube.

Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent

How to fix or glue inflatable boat PVC fabric patches and accessories to Hypalon fabric RIB collars and tubes (and vice versa) How to make an emergency repair using TEAR-AID® Type B to a PVC inflatable boat, RIB, raft and other PVC / vinyl structures How to find a leak in my inflatable boat, RIB, dinghy, life raft or inflatable kayak collar or tubes

relative humidity less than 60% (low cost humidity meters can be obtained from most good DIY stores if unsure) Cut a fabric patch (two if the tear is greater than 50mm) with rounded corners, allowing a minimum 5cm overlap around the hole/tear. Place the patch over the hole and mark around the patch on the tube with a pencil/removable marker. If tear is greater than 50mm long then also cut one matching shaped piece of polythene. Successful repairs to RIB collars and inflatable boat tubes are dependent upon the environment in which the repair is carried out - ideal conditions are: Before contemplating your tube repair and buying adhesive or a repair kit, you will need to identify the inflatable tube fabric that your boat is made from. The type of fabric determines the type of adhesive, solvent and patch fabric that is required to undertake the repair.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment