About this deal
The carburettor comes with a standard setting, this provides an optimum fuel-air mixture under most operating conditions. Genuine Stihl HS45 Carburettor 4228 120 0608 Replaces4228 120 0606 Suitable for the following models; Carburettor Diaphragm & Gasket Kit For Stihl FC100, FC110, KM90, KM100, KM110, KM130 FOR ZAMA CARBS
Stihl HS45 Carburettor - 4228 120 0608 | GHS - Garden Hire Spares
When you cleaned the carb did you take out the mixture adjusting screws inlet needle and wire gauze filter ? Carburettor Diaphragm & Gasket Kit For Stihl HL90, HL90K, HL95, HL95K, HL100, HL100K FOR ZAMA CARBS The Stihl HS45 Hedge Trimmer is a light and compact petrol powered trimmer, it's an efficient garden tool for trimming hedges and shrubs. If over time you find your hedge trimmer does not idle as normal, this may indicate that your carburettor needs adjusting.
Fine Tuning for Operation at High Altitude
Replacement forStihl HS45 Carburettor Quality non-genuine part replaces4228 120 0606 & 4228 120 0608Only suitable for models fitted with a Zama C1Q-S70 or S169 carb Suitable for the following models; We have put together some steps to adjusting your carburettor following the Stihl HS45 operators manual. Preparations
STIHL HS 45 STIHL HS 45
Adjust the idle speed with the idle speed screw (LA) so that the cutting blades do not run. Cutting Blades run when Engine is Idling Please submit your product inquiry to the form below and we will reply as soon as possible! # # Include Make / Model ID NUMBER / Year & Parts Required, just had a try and it started and ran but not well enough to use with the fuel cap off/loose but did cut out in the end, now it wont start again. It is usually necessary to change the setting of the idle speed screw (LA) after every correction to the low speed screw (L). Fine Tuning for Operation at High Altitude