Benro Mach3 Tripod S3 Carb 4 Sect Long

Product Information

Maximum Height w/Column Retracted (cm): 135 Maximum Payload Capacity (kg): 12 Quick Release Type: N/A Slim Frame: Yes-with 3 stops Product Height (cm): 45 Product Length (cm): 14. Magnesium Casting: Wherever possible the Mach3 TMA48CXL employs magnesium castings making it among some of the lightest tripods on the market. Magnesium Casting: Wherever possible the Mach3 TMA27A employs magnesium castings making it among some of the lightest tripods on the market. It depends on how thick the legs are to a degree, 4 leg sections can mean the lower legs are getting quite thin and flexy so sometimes a centre column would be just as good and is easier to use - just one extension to play with rather than 3. Monopod Conversion: It is extremely simple to convert one of the Mach3 TMA27A's legs into a monopod adding even more versatility.

However, the distillery got off to a pretty rocky start as it quickly shut down in 1900 due to financial problems.

A huge, stiff, light, beautifully made 4 leg section carbon fibre tripod with magnesium fittings and lots of nice detail touches.

I'm using it with a Skywatcher 127mm Mak and the AZ-GTi mount which altogether weighs about 14lbs with 2" eyepieces. No matter what the conditions are or what the elements I’m shooting in it just does what it’s meant to do and very well. I've also used it with a 90mm refractor, and it does wiggle a bit more simply due to the distance of weight from the center.Try hanging weight for sure to see if you can cut the vibration dampening time down or hopefully in half. We like to say there are four ingredients – the finest barley grown and malted to our specifications, water from the Chapelton Spring in the Romach Hills, yeast and us, the distillers who make it happen! Replacing that was my Vanguard Alta Pro 263 AT, which is still a brilliant tripod, but just lacked the height I was after.

I think the reference must be to 4 leg sections of a 3 legged tripod as opposed to a 4 legged support which would be a quadropod as opposed to a tripod! Spiked Feet: A set of Spiked Feet are included with the Mach3 TMA38CL tripod for increase stability when shooting outdoors. As part of our most advanced range of photo tripods, the Mach3 TMA48CXL combines classic design with advanced materials. As part of our most advanced range of photo tripods, the Mach3 TMA27A combines classic design with advanced materials. Clifton Cameras is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN728300).The classic design includes a sliding centre column with large easy grip lock, foam cold weather grip on one leg, and secure and precise collar leg locks. with the column extended and go down low to 31cm - this tripod can hold a maximum load of up to 14kg. Over the years I’ve been photographing landscapes, clambering over rocks and perching myself on top of tors, balancing on stone walls and standing on steep hillsides, there have been more than a few times I’ve needed an extension on one or more of the legs on the tripod I was using at the time. Since the scope is mounted on the side with the M2C I wonder if the column is somehow moving or flexing since all the weight of your scope is not centered directly over the tripod.