276°
Posted 20 hours ago

LIGHTAILING Light Set For (Ghostbusters Ecto-1) Building Blocks Model - Led Light kit Compatible With Lego 21108(NOT Included The Model)

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Before dive into the KIT itself I have to remark, that the customer service was just fantastic before buying the KIT. I had some doubts and questions but they were just provided one of the best support online. Our light kits come with detailed, step-by-step installation guides to help you add lights to your favourite models. No electronics experience required! Connect multiple kits Reconnect the 2×6 plate to the rest of the roof, without the white plate underneath. Then remove the red light with white stud underneath so we can install another flashing Bit Light to it. We will be installing lights to the headlights first. To do this, remove the following pieces from the front of the car. CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light. Connecting cable connectors to Expansion Boards

Before we hide the 2 cables from the right we will first install an LED to the blue light at the right side window. To do this, remove this section at the grey stud with clip. The Modular Building series is a dream come true for adult fans of LEGO®. With ultra-detailed buildings, ranging from a Town Hall (10224) to a Detective's Office (10246), there is enough variety in sets to create your own large scale LEGO® town. And now with our easy to install light kits, you can create your very own realistic and fully functioning town. LEGO® TechnicPLEASE NOTE: THIS SET IS A LED LIGHTING KIT ONLY. LEGO® SETS ARE NOT INCLUDED. STANDARD RC + SOUND VS STANDARD REMOTE VS STANDARD

Take another standard Bit Light (non flashing) and install it with the LED component part facing down (as it wont connect with it facing up). Secure this into place by connecting another transparent blue plate (which we have provided) over the top. Ensure the LED component part is facing down or inward We will now install flasing LEDs to the blue spot lights at the front. Remove the grey plates with clips from the pole and then disconnect the round blue pieces from them. Authentic Cadillac ambulance engine sound that loops until you stop it. Includes unique start and stop sounds, and even a great"engine stall" sound that will be triggered 40% of the time when you start the engine.

Remove the following pieces from the 2×6 plate and then connect one of the provided grey 1×2 Lego plates on each side as per below. To find a lighting kit for your LEGO® set, simply scroll and browse below to find the appropriate light up kit. You can also use the search function above and type in the model name or number to find your set. When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between.

Turn the roof on its side to allow you to then group all the cables from the front roof LEDs. Twist/wind them around each other, same way we did for the rest of the light cables. Take 1 standard Bit Light (non flashing) and place it on top of the stud of the grey round plate ensuring the LED component part is facing the correct way up. Secure the LED in place by connecting the transparent Lego plate over the top. To ensure a trouble-free installation of your light kit, please read and follow each step carefully. Before reconnecting the white Lego pieces which make up the front bonnet, ensure that the cables from the LEDs are laid in between the studs of the Lego plates underneath as per below example images. Connect the cables from the tail lights into one of the 12-port expansion boards ( expansion board#1) by first winding them around the board before connecting them into the first 2 available ports. We are winding them around the board so that we don’t have too much excess cabling to have to hide later on.

Our difference

Take the cable from the LED we just installed and the 2 cables from the front right lights and hide them in between studs up the right side of the car by reconnecting the grey triangular plates over the top of them.

If there's something strange in your neighbourhood, who are you gonna call? Why the Ghostbusters of course! KIT itself : really nice KIT. You just simply can not compare to "without light" KIT. That is an another level. This LEGO light up kit contains lighting features such as flashing sirens on the top of the Ecto-1, front and rear headlights, and flashing emergency lights at the rear of Ecto-1. Installation Guide Take the front section of the roof and remove the white roof plate from underneath, then remove the transparent blue triangular pieces, followed by the grey pole with attached light pieces.This kit has not one, but two sound modules, and together these modules can play four sounds at the same time. This provides the most realistic sound possible, including: Super popular ideas like the NASA Apollo Saturn V (21309) or the Old Fishing Store (21310) are sets people can now own. And now you can combine our specially designed LEGO® lights to your collection and bring them to life! Easy to install LEGO® light kits

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment