John Adams | Hot Wires: Plug and play electronics set with 100 experiments! | Science and STEM Toys | Ages 8+

Product Information

The StreamLine system can be used with wire and film probes, Dantec Dynamics standard as well as custom-designed probes, in any combination of probes for one-, two- and three-dimensional flows. The StreamLine system includes a Calibration unit, type 90H01/H02, for velocity calibration of probes for air. The specific method of hot-wiring a vehicle is dependent on the particular vehicle's electrical ignition system. It connects to a pressurized air supply and creates a highly stable free jet of very low turbulence, normally below 0.

Hot-wiring generally involves connecting the wires which complete the circuit when the key is in the "on" or "ready" position (turning on the fuel pump, ignition system and other necessary components), then touching another wire that connects to the starter. Listings of wire colors and locations and ignition system schematics may sometimes be found in Internet databases. It is a high-performance, multi-channel anemometer whose hardware is controlled from a PC through the StreamWare application software running under Windows. With features such as the snap-together components, this game is easy to use and suitable for inquisitive children over the age of 8. Simply snap together the component blocks and discover 100 action packed experiments involving light, sound and movement.Build a real flying disk, a working FM radio with automatic station selection, a lie detector to test your friends, a burglar alarm to keep your valuables safe, sound effects and lots more! Thieves lacking the basic mechanical skills and knowledge of automotive electrical systems sometimes simply use physical force to bypass the ignition lock, smashing the key mechanism to reveal the rotation switch, which is operated by the key's tumbler. However, a legitimate vehicle owner who has lost a vehicle key or starting a vehicle with inoperable ignition switch (e. Directional calibrations can also be performed using a rotating holder that allows probes to be placed in any angular position with respect to the flow.

Conversely, most types of motorcycles are often easier to hot-wire, especially scooters and older naked bikes, which lack advanced security features beyond mechanical locks and conventional ignition switch. The velocity can be adjusted to any velocity from a few cm/s up to Mach 1 utilizing three different nozzles. Vehicles from the 1990s or older, which often have a carbureted engine, a manual transmission, and a single ignition coil and distributor, can be hot-wired from the engine bay. The system can also be used in combination with other transducers or instruments for parameters other than fluid velocity.

The latest anemometer development from Dantec Dynamics is the StreamLine system, type 90CN10/C10, which represents a totally new concept with automatic probe setup and execution of experiments. Contents: transparent assembly workstation, connectors, buzzer, touch plate, photo resistor, LEDs, battery units, loudspeaker, music IC, alarm IC, sound IC, motor unit, propellor, antenna coil, lamp, bulb, microphone, power amp IC, resistors, capacitors, transistors, diode and full colour instruction booklet. The calibration unit is operated from the StreamWare application software and can provide fully automatic calibrations. Using standard lock picking to start a vehicle is now usually ineffective, since most cars now use immobilisers or transponder key verification. The software sets up the anemometer modules, performs velocity and directional calibrations and provides an experiment platform, where automatic sequences of hardware setup, traverses, data acquisitions and data reductions can be carried out.