Andis Pro T-Outliner Trimmer for Outling & Fading (Model: 04710) - US 110 VOLT - TRANSFORMER REQUIRED FOR INTERNATIONAL USE

Product Information

With that in mind, I wanted to put all the info on these trimmers in one place and compare the Andis Outliner 2 vs T-Outliner to help you figure out which will suit you best.

Beneath the hard plastic case lies an oscillating electromagnetic motor, cutting at 7200 strokes per minute. A pretty good performance, this guarantees you fast trimming and more than enough power. Note that some electrical short potential (power) may still return via the neutral, particularly if there are issues with the appliance’s and/or the building’s electrical wiring. Strong, fast motors with 7,200 SPM. The faster that the blades move, the smoother the cut. Lower SPM motors can actually grab/pull the hair, leaving for user discomfort and, at times, ingrown hairs.The T-Outliner gets a little warmer. Due to the larger blade, it has to do more work, and it gets a little warmer than the Outliner 2. This will mostly happen while making longer, detailed cuts where the motor will be running for some time. For a trimmer that boasts of having an electromagnetic motor, being able to cut hair at 7200spm (Strokes per Minute) is definitely quite impressive. If you decide to use the T-Outliner with a T-blade for beard trimming, I advise you to throw preshave oil in the mix. It will allow for an even smoother, pleasure-filled experience. This Andis hair trimmer is also perfect for dry shaving, something other trimmers have some difficulties with. Well, the Andis brand is always committed to providing strong blades for their hair trimmers and clippers.

Weighing in at just over 200 grams, it's lightweight and comfortable with a deep-tooth, carbon steel GTX blade designed for close-cutting and which can be zero-gapped using the Andis Zero Gapper Tool.If you are using it as intended, meaning to outline the edges of the hairline or beard, then you’re only using it for a few minutes at a time. Then it rests while you finish the cut and move onto the next one. I find when I am working that I only use the trimmers about every 15 minutes or so. This gives them plenty of time to cool down and I have never needed to use a spray on the blade. To ensure smoother hair cutting action, Andis tend strengthen their products’ blades with carbon. The T-blade of the T Outliner trimmer follows the same formula. Especially if you’re looking to do more extensive trims, you’ll find a solid, heavy-duty ready choice here.