G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

Product Information

Universal fitting with internal thread CELLFAST IDEAL G1 / 2 "- G3 / 4", for water intake with external thread. The other common style of sealing a BSP thread is to make the seal around the outside of the thread at the opposite end of the thread via an elastomer seal sandwiched between the two outer surfaces that come together. Pressure connections which include the suffix EN 837 or DIN 16288 are sealed on the end of the thread with a small diameter O ring which is placed around the post protruding from the end of the thread. The terminology for the use of G and R originated from Germany ( G for gas, as it was originally designed for use on gas pipes; R for rohr, meaning pipe. The WIKA news subscription informs you, free of charge, by e-mail whenever there is a new blog article.

Jointing threads These are pipe threads where pressure-tightness is made through the mating of two threads together. These high quality, male threaded to tube adapters offer a variety of Metric, G parallel or R tapered threads and diameters to suit each and every connection. At least 41 thread sizes have been defined, ranging from 1⁄ 16 to 18, although of these only 15 are included in ISO 7 and 24 in ISO 228.Most pressure gauges around the world have either an NPT or G (metric) connection for insertion into processes. If you have any questions for our product, please contact us, we will reply to you in under 24 hours.

Some pressure connections also include a tapered shank which assists in the correct alignment of the bonded seal. For a taper thread, it is the diameter at the "gauge length" (plus/minus one thread pitch) from the small end of the thread. The inner diameter of connector: 25mm(/G3/4inch), outer diameter: 20mm(G1/2inch), overall length: 34mm/1. S. or Canada, the pressure gauge will most likely come with an NPT (National Pipe Tapered) connection.No need to use a hex key for installation, just tighten it to the external thread, and install it directly on the top of the isolation valve.