Cuprinol 5092586 Garden Shades Exterior Woodcare, Old English Green,2.5L

Product Information

Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent Before full application of Cuprinol Garden Shades, we always recommend testing a small area first, before beginning any project to ensure that you are happy with the colour and overall look of the finish. Apply second coat as above. The second coat must be applied the same day as the first. If the first coat is left to dry overnight then the second coat will not adhere to the surface correctly

With a promise of 6 year weather protection on wooden surfaces, this water based paint takes approximately 8 hours to dry and covers up to 12m² per litre on average. Easily applied with a brush, roller or sprayer, this beautifully designed paint is available in 2 sizes including Cuprinol Garden Shades 1L and Cuprinol Garden Shades 2.5L. For optimum results, a maximum of 2 coats is generally required. Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay. Untreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay. Q. Is Cuprinol Garden Shades suitable for a large log cabin / summerhouse at the end of the garden? Before you begin, make sure that you always stir the product thoroughly before emptying the contents into the sprayer and refer to the sprayer instructions for full instructions before every use. Before you begin, ensure that any nearby areas have been covered encase overspray occurs. Any overspray that may occur should be cleaned up immediately with water and household detergent.

A. It's important that you use a wood preservative that doesn't contain wax, oil or silicone as these will prevent the paint from penetrating and adhering to the wood. Wood preservers that are advertised as being waterproof and resistant to weathering often contain wax, oil, silicone or a combination of these.

Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application. Minimum of 2 coats is required - subsequent coats must be applied on the same day no longer than 8 hours apart Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days.Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Specially designed to colour, protect and brighten up your garden furniture, shed & fence. Cuprinol Garden Shades allow the natural texture of the wood to shine through A. Absolutely! Cuprinol Garden Shades is suitable for any garden structure including summerhouses and log cabins. If it's a bare wood structure, new or old, its probably worth treating it with a wax free wood preservative first to protect the wood from mould, algae and fungi. Allow this to fully dry before painting. Its important than any preservative used is wax free otherwise the paint may not adhere to the structure.