Milwaukee 49-16-2647 M18 48" Grease Gun Hose W/Coupler

Product Information

Step 5: Make sure you clean the gun and store the grease properly. The way you use your gun will determine how long it will last for you. How Do You Set Up a Milwaukee Grease Gun? Pull the trigger for 10-20 seconds. Grease must come out. That’s the sign that all the air has escaped. If grease does not appear, push the priming valve again.

The company's products are known for their durability, reliability and ease of use. Macnaught is a significant player in the fluid handling industry and has a reputation for producing high-quality equipment for various applications. Severability: If any provision of these Terms and Conditions is deemed invalid or unenforceable by a court of competent jurisdiction, the remaining provisions shall remain in full force and effect. Take a look at our cordless Milwaukee M12 and M18 grease guns and kits below to see which models are best suited to the job. You'll be getting a quality product from a top brand either way. The next step is to remove the barrel from the bulk grease. When you’re through, you can wipe off the excess grease from the outside of the barrel. Screw it into the grease gun. Try to release the rod from the retaining slot and press it completely into the barrel. Don’t forget to prime the grease thereafter. b. RED SHED is not liable for any misrepresentation, error, or inaccuracy in any product description, whether made by RED SHED, its contractors, representatives, or third parties.

Macnaught is an Australian company founded in 1957. The company initially focused on manufacturing and distributing lubrication equipment and pumps for various industries. Over the years, Macnaught has expanded its product line to include a wide range of fluid-handling equipment, including fuel transfer pumps, grease pumps, flow meters, and hose reels. Ensure the loader fitting is compatible with the coupler and that it is rated for at least 10,000 PSI. If not, you may damage your grease gun. Operate the loader pump until the rod is pushed out of the barrel up to about 8 inches. Now, you can rotate the rod handle to release the plunger. Press the rod completely into the barrel. Once again, don’t forget to prime the grease gun. How Do You Release a Milwaukee Grease Gun?

Precise control: The Macnaught Grease Gun End allows for precise control of the amount of grease you apply, so you can avoid over-greasing and wasting grease. Compatible with Milwaukee grease guns: This grease gun end is compatible with Milwaukee grease guns, making it easy to find replacements when needed. In addition to their traditional product offerings, Macnaught has also developed innovative new products, such as the world's first hand-held oil transfer pump, the "K7" and the "Retracta" range of hose reels which are now sold in over 80 countries worldwide.A grease gun is an effective tool for moving grease to a point of application. The close fitting of the apertures ensures that lubricant is applied only where needed. Step 3: Test it to be sure that it’s working by placing its mouth on a piece of paper before squeezing the trigger. If t’s working, some grease should be dispensed. It means you’re all set for lubrication. Air-Powered Grease Gun - These are mainly used on large commercial projects due to the force with which the grease is dispensed. These types of gun are powerful because they are attached to an air compressor by a hose, which creates the pressure to force the grease from the gun. Shop Air Grease Guns Here Hand Pump - Using hand pump grease guns will involve operating a pump on the top of the gun. This will create a buildup of air within the tool, which will create the pressure necessary to force the grease from within the gun