ASUS RT-AX53U Dual Band WiFi 6 Extendable Router with Mobile Tethering (Replacement of 4G 5G routers) free Network Security Parental Control, VPN, AiMesh Compatible, Gaming & Streaming Smart Home USB

Product Information

Memory: 246200K/262144K available (7949K kernel code, 2954K rwdata, 1936K rodata, 268K init, 327K bss, 15944K reserved, 0K cma-reserved) The actual transfer speed of USB 3.0, 3.1, 3.2, and/or Type-C will vary depending on many factors including the processing speed of the host device, file attributes and other factors related to system configuration and your operating environment. MtCmdSetTxRxPath: ctrl_chl=5, ctrl_ch2=0, cent_ch=5, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) MtCmdSetTxRxPath: ctrl_chl=40, ctrl_ch2=0, cent_ch=40, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) MtCmdChannelSwitch: ctrl_chl=6, ctrl_ch2=0, cent_ch=6 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1)

gigabites csatlakozó –Egy Gigabit WAN és három Gigabit LAN csatlakozó, tízszer gyorsabb, mint a 100–Base T Ethernet. rast_init_bssinfo]: WI[ra0], id[ 70.106024] ##### drivers/net/wireless/mediatek/mt_wifi_7915_v7400/mt_wifi_ap/../mt_wifi/embedded/ap/ap_cfg.c: RTMPIoctlGetMacMode:12622 MacMode = 0 MtCmdChannelSwitch: ctrl_chl=5, ctrl_ch2=0, cent_ch=5 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdChannelSwitch: ctrl_chl=64, ctrl_ch2=0, cent_ch=64 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=3, ctrl_ch2=0, cent_ch=3, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1)MtCmdChannelSwitch: ctrl_chl=60, ctrl_ch2=0, cent_ch=60 DBDCIdx=1, ChBand=1, BW=0, TXStream=2, RXStream=2, scan(1) Connect to ssh and login by using the same credentials you used to login to the web interface (user is usually “admin”). MtCmdSetTxRxPath: ctrl_chl=48, ctrl_ch2=0, cent_ch=48, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1)

Linux version 5.10.135 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20256-23c77384f3) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sun Aug 7 14:17:40 2022 MtCmdChannelSwitch: ctrl_chl=2, ctrl_ch2=0, cent_ch=2 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdChannelSwitch: ctrl_chl=3, ctrl_ch2=0, cent_ch=3 DBDCIdx=0, ChBand=0, BW=0, TXStream=2, RXStream=2, scan(1) MtCmdSetTxRxPath: ctrl_chl=108, ctrl_ch2=0, cent_ch=108, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1)mtk_soc_eth 1e100000.ethernet: connected mac 1 to PHY at fixed-0:01 [uid=00000000, driver=Generic PHY] MtCmdSetTxRxPath: ctrl_chl=104, ctrl_ch2=0, cent_ch=104, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1) MtCmdSetTxRxPath: ctrl_chl=2, ctrl_ch2=0, cent_ch=2, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) generációs WiFi szabvány –A WiFi 6(802.11ax) szabvány a jobb hatékonyság és a nagyobb átviteli kapacitás eléréséhez támogatja a MU-MIMO és az OFDMA technológiát. bssUpdateChannel), ucPrimCh=1, ucCentChSeg0=3, ucCentChSeg1=0, BW=1, ucHetbRU26Disable=0, ucHetbAllDisable=1

set_basic_ifname_vars: WAN eth1 LAN vlan1 [vlan1 ra0 rai0] WIRED [vlan1] ETH_IFNAMES [] 2G ra0 5G rai0 60G N/A USB usb AP_LAN vlan1 DW_WAN eth1 DW_LAN vlan3 force_dwlan 0, sw_mode 1 UBIFS (ubi0:1): FS size: 38473728 bytes (36 MiB, 303 LEBs), journal size 1904640 bytes (1 MiB, 15 LEBs)Linux version 4.4.198 (heidi_wen@sw4-build-server) (gcc version 5.4.0 (LEDE GCC 5.4.0 r0-22e5567) ) #1 SMP Fri May 27 17:44:17 CST 2022

MtCmdSetTxRxPath: ctrl_chl=4, ctrl_ch2=0, cent_ch=4, RxPath=3, BandIdx=0, ChBand=0, BW=0,TXStream=2, RXStream=3, scan(1) So, just use the RT-AX53U with a smaller network since it’s clear that this is what it was built for. The next client device is equipped with an Intel 8265 adapter (WiFi 5) and the wireless performance differs a bit more near the router (557Mbps at 5 feet and 526Mbps at 15 feet), but it does get more similar to the WiFi 6 client device the farther I went. At about 75 feet, the attenuation was about -86dB and the throughput was 22.6Mbps upstream and 17.8Mbps downstream, so I would not go farther than that. Asus RT-AX53U – Wireless Test – 5GHz – WiFi 5 and WiFi 6 client devices – Downstream Asus RT-AX53U – Signal Strength (Attenuation) – 5GHz – WiFi 5 and WiFi 6 client devices – Downstream And, of course, the Wi-Fi 6 technology of the RT-AX58U provides impressive performance for your home wi-fi network. When used in the same room as our existing 802.11ac router, the RT-AX58U managed to squeeze a little extra speed out of our Internet connection, increasing Wi-Fi speeds from 55Mbps to 59Mbps. bssUpdateChannel), ucPrimCh=104, ucCentChSeg0=106, ucCentChSeg1=0, BW=2, ucHetbRU26Disable=0, ucHetbAllDisable=1The first client device is the AX200 PC and, at 5 feet (-35dB attenuation), I saw an average of 657Mbps upstream and 348Mbps downstream. At 15 feet, despite a signal drop (-49dB), the throughput wasn’t that affected since I still measured an average of 601Mbps up and 314Mbps downstream. Going to 45 feet, it could still offer decent values: 243Mbps upstream and 121Mbps downstream. But at about 75 feet, the attenuation was -86dB and the throughput was not that great: 24.5Mbps upstream and 18.1Mbps downstream. Asus RT-AX53U vs RT-AX55 vs RT-AX56U You’re going to find all the ports and connectors on the rear side of the router and, from the left, there’s the Reset button, followed by Power button and the Power port. Then we get a USB 2.0 port which is there for printers since you’re not going to like the storage performance that it can deliver (are USB 3.0 that much expensive?). And next to it, there’s the WAN port (Gigabit) and three Gigabit LAN ports. What happened, where did the fourth LAN port go? It got annihilated by the budget cuts. Listen, WiFi is great and all, especially the WiFi 6, but you can’t yet beat a cabled connection, so I am definitely not a fan of removing LAN ports. The ports area on the Asus RT-AX53U. Nagyobb kapacitás és hatékonyság –a MU-MIMO mellett az OFDMA technológiát is támogatja a hatékony csatornakiosztás eléréséhez, több eszköz egyidejű kommunikációjának biztosításához. MtCmdSetTxRxPath: ctrl_chl=60, ctrl_ch2=0, cent_ch=60, RxPath=3, BandIdx=1, ChBand=1, BW=0,TXStream=2, RXStream=3, scan(1)