About this deal
Finally, the quality of 3D prints depends not only on layer height but also on the XY resolution of your 3D printer. This XY resolution is the pixel size of a 3D printer’s LCD screen or DLP projector, or a laser spot size in a laser based 3D printer. Usually, it is between 20 μm and 90 μm. In other words, even if you print with very thin layers, the quality is still limited by the fixed XY resolution of your 3D printer. So consider that when choosing the right layer height. Elegoo is another popular manufacturer of consumer-grade resin printers, like the Elegoo Mars 2, 2 Pro, 3, and more. As Mars is for resin printing, Mercury is Elegoo’s planet for their wash and cure station. The Elegoo Mercury Plus V2.0 is a washing and curing station that will make your post-processing journey for resin prints a breeze.
Lastly, when you need to print big models which use up a lot of expensive resin, you want to use conservative 3D printing settings. Do whatever you can to lower the risk of failure, even if printing takes a bit more time. Remember, failure will cost you way more – it will cost time and resin to reprint the whole model. The light source design, exposure time and other printing parameters of different brands of LCD 3D printers are different.The resin composition ratio of SUNLU designed for the photon is special , it is best consistent with resin photon print parameter For color LCD 3D printers,we recommend making it around 8-12 times longerthan your normal layer exposure time.One user who used this resin to create scale model parts said that there was no yellowing at all. Even when he has run the UV power, the prints were still clear.
What many customers love about this ABS-like resin is that it emits low odors. They are also satisfied with the quality of their prints. Lift height is the distance the build plate moves up between layers to separate the printed model from the FEP. What Lift Height should you use? Once you’ve washed your 3D print, you also need to cure the model. Curing is a post-processing technique that involves using Ultraviolet (UV) light to further solidify the printed resin of your model. With this technique, the UV rays still mainly cure the model where the light strip is, but it also makes the light shine through the filter in other areas. This way, the light isn’t shining 100% from one spot and 0% from every other point, effectively giving you a more even curing process for your model.Second, you can perfectly print with 0 transition layers as long as you set the bottom layers right. Therefore, we haven’t found much use for this setting yet. So start with 0 transition layers. Resin manufacturers tip Also called the number of bottom layers, bottom layer count, or number of base layers in some slicers. What is the Number of Burn-in Layers?