G-Paint 8 Pack - Golf Club Infill Paint - Black - White - Red - Blue - Yellow - Pink - Green - Orange Paint Fill Numbers Letters, Logos onto Existing Golf Club Graphic

Product Information

Once the paint has been applied to the required area using your preferred method, allow the paint to dry With all three methods it will be necessary to smooth out and remove excess paint and clean up any spillage onto the clubs ensuring that the paint remains only in the area you want to fill. Two-Part Urethane Automotive Coating. Many regard this as a good product for painting golf clubs, for its high gloss finish and durability. Is more expensive and because it is spayed on is not economical for Custom Paint Fill Applications. Paint: Choose a paint that can withstand heavy impacts, abrasions, and friction. Golf club heads are meant to undergo a substantial amount of friction and hence choosing a normal paint would not serve the purpose. To remove any excess paint, use a razor blade. You can also use a lint-free piece of cloth dipped in nail polish remover to remove the excess paint.

Enamel Paint. Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. When looking for suitable paint to repair chips, scratches or, scuff marks, it is essential to choose a paint that will withstand the heavy impacts that all golf clubs will encounter. Place Acetone in a suitable bowl and allow the golf clubs to soak in the paint remover. It is recommended that clubs soak for at least six hours allowing the acetone to permeate to all the difficult places to reach. First, you need to ensure you use the right kind of paint. We’ve seen/heard people use all sorts of paints and fills ranging from nail polish to permanent markers and paint pens, but we’ve had the most success using hobby/model paint. Typically, enamel hobby paint is more durable, but we’ve found acrylic hobby paint to be easier to use and easier to dilute (which is important). Place your putter in the metal bowl filled with acetone. Make sure all parts of the putter that you want to be painted are submerged well in the acetone.Take a metal bowl and pour acetone into it. Wear gloves made of latex as a precaution before you transfer the acetone. Dedicate a good amount of time while using sandpaper on your driver head. Good preparation time will pay off in the long run. Apply generous amounts of paint-remover using Q-tip. Acetone will also do the job. Wear latex gloves before using acetone. Cover the other parts. The club head and the golf club grip may be covered with painter’s tape so that paint does not get on them. Use Acetone or paint remover to remove the paint from your golf iron. Wear latex gloves before you use acetone.

It is easy to apply with a small needlepoint applicator providing accurate results. The paint, touch dries within 30 minutes and is fully dry within 6 hours. It is suggested that only one coat is required. If you feel that the color is not intense enough, add 1 or 2 more coats. Some preparation is required before it’s time to paint your golf clubs. There are two vital aspects that need to be taken care of before any painting can begin: Allow the paint to dry ( 30 TO 40 minutes) Use sandpaper to ensure a smooth, shiny surface, repeat the process at least 4 times.To clean up the paint, let the newly painted putter sit for a while to cure. Then dip your Q-tip in acetone and brush it gently on the areas where the paint is to be cleaned. Use pointed objects like nails or safety pins to get the paint out of narrow or hard-to-reach areas, like letters and edges. Choosing paint to repaint your golf clubs or to Customize your clubs with paint refill can depend largely on durability and, frequency of having to repaint the clubs plus ease of application. Epoxy-based enamel paint is recommended as the Best Paint for Golf Clubs.

As with painting the whole club, the same initial prepping must be followed ensuring that all paint is removed from the areas to be painted. Once cleaning is satisfactorily completed and areas to be painted are dry Custom Paint Fill can commence. The process can be repeated 2 or 3 times to create a deep glossy color. Allow the paint to dry and mature for at least 24 hours before using the clubs. When removing excess paint. Wrap a cleaning swab soaked in acetate around a razor blade or any flat straight object. Rapidly wipe the swab over the area. Replace with a cleanly soaked swab if dirty. Repeat these steps until the club surface is completely clean. Do not use Q-tips as they can cause an indentation on the surface of the paint. Use a Q-tip to apply generous amounts of paint-remover to the areas of the golf club where you do not want any old paint. Acetone will work well. Wear latex gloves before using acetone.

Once you are sure the primer is dry and cured, make sure you have a smooth even surface with the use of micro-fine sandpaper. Apply a thin, even layer of epoxy-based enamel paint using a spray can or spray gun.

Remove the existing paint from the wedges by soaking it in a bowl filled with acetone for a few minutes. The reasons for the painting of golf clubs can be to repair chips on a driver, paint the complete shaft or, Custom paint fill. Once you are satisfied that all old paint has been removed, using a degreasing agent and microfibre cloth make certain that all of the acetone and old paint has been removed ensuring that the club is free of any dirt that could affect the paint from adhering to the club. Allow the clubs to dry completely. 2) Apply PrimerG-Paint is durable, providing long-lasting results and making your old clubs look like new again. The colors can be mixed to create color combinations. For example, white plus red will give you pink. G-Paint is compatible with most brands of golf clubs. Final Thoughts So please continue reading as I will outline all the steps that show you exactly how to paint your golf clubs and get them looking new again! Once it has soaked-in the paint remover, use a nail, or any object with a pointed edge to scrape the paint from the golf club and out of narrow or hard-to-reach areas, like letters and edges. Irrespective of what purpose you are using the paint for, there are several steps that have to be followed before applying the paint. Materials Required