ARCTIC MX-6 (4 g) - Ultimate Performance Thermal Paste for CPU, consoles, graphics cards, laptops, very high thermal conductivity, long durability, non-conductive, non-capacitive

Product Information

The wipe is made of 100% Limonene extracted from citrus essential oil. This would mean that these wipes don’t have alcohol or benzenes as this substance is used in industrial applications for cleaning as it is effective and gentle on metals and alloys. The application of the MX-6 is particularly easy thanks to its high viscosity, which also makes it particularly suitable for direct-die applications, which occur, for example, with graphics cards or console processor GPUs. A graphics card with a much higher heat load or the HEDT/EPYC CPUs with large surface areas are better candidates for thermal paste testing. We'll go into our breakdown of how we test these thermal pastes below, but the key takeaway here is that a single thermal compound can perform differently based upon several variables, such as what type of cooler and mount you use. To cover all the bases, we've tested every thermal paste with three variables: We're also putting a new take on an old approach to the test — thermal pads. These pads can be used as TIM and come as a single sheet you simply apply to your heatsink, with Thermaltake's Heilos Pad being the first new thermal pad entrant to see our test bed in the coming weeks.

For the air cooling low- and high-tension tests, we used a large Noctua NH-D15 air cooler. We created the low tension mount environment by torquing the mounting screws to 1.13 Nm (10 in/lbs).Noctua's NT-H1 is a super-reliable paste that has been around for years. It is regarded as one of the best with more than 150 awards and recommendations, and it's one of the best options for building or repairing computers, especially for amateurs who may not yet have a lot of experience with thermal pastes but are confident enough to use them. The NT-H1 formula also gets excellent marks for usability, with an easy-to-apply consistency. It's easy to clean when dry and is designed to not corrode. In contrast, traditional thermal paste compounds are relatively simple for every experience level. Most, but not all, traditional pastes are electrically non-conductive. The performance value chart shows most of the liquid metal compounds with a poor value-per-gram rating, but once again, Phobya LM proves to be the outlier for that sub-category with its budget price tag. The above picture shows a thermal paste. This paste is not easy to spread in my opinion unlike MX-5 or even Noctua NT-H1. The XTM50 paste by itself has low viscosity, so can also just use the 'Dot method' to apply the paste and let the mounting pressure do its thing. But if you're too worried about applying using that method, then the bundled stencil and spreader make it very easy to get things done. In theory, you can use any application method for a compound with low viscosity, but the stencil makes it that much easier to apply. It's for new builders who don't necessarily have the technical know-how of properly applying thermal paste and how improper application can have a lasting impact on the overall performance of the CPU.

You may have heard of thermal pads being used by many as a replacement for thermal paste. That's entirely normal because thermal pads are also highly efficient. Thermal pads are primarily used on M.2 SSD modules. As such the heatsink or the motherboard shroud covering the M.2 SSD module holds thermal pads to dissipate the heat produced by the modules. It works the same way as thermal paste, except these are solid pads as opposed to pasting or liquid solutions. We think the Thermal Grizzly's Carbonaut is one of the best options on the market. This can be used on both processors and GPUs too. The application of thermal pads involves placing the pad on top of the CPU IHS, thereby filling the gap between the IHS and the heatsink. Now, we fold the paper and apply enough pressure with our fingers on it to see how the paste spreads. the wipes MX Cleaner To remove thermal paste they come in individual sachets, and be careful because they are wet wipes that have a very, very strong smell of disinfectant. We have tested them, and of course we recommend using them to remove the previous thermal paste naturally, without pressing too much and folding the wipe so that you always wipe it with a clean part, but once that is done, we recommend wiping it down a bit. toilet paper to the surface to remove the remains of the disinfectant liquid that may remain. Even though a dizzying array of different thermal pastes is available — some blends have been around for over a decade — new formulations still come to market at a surprising pace. Long-time PC cooler maker NZXT recently entered the market with its first paste, the not-very-excitingly named NZXT High-Performance Thermal Paste. Cooler Master introduced a new purple CryoFuze, and Alphacool unveiled its Apex thermal paste. Cooling mainstay Corsair also has a new XTM70 blend that will be heading to our test bench soon, and Gelid has recently released its GC-4 Thermal Paste, showing that the TIM market is still thriving. Liquid metal compounds make their way to the top of the temperature chart with slightly cooler values than the traditional pastes. Interestingly, the difference between the top and bottom of this chart is less than 4C.Now yes, we are going to proceed to apply the thermal paste on the processor, in this case on a Core i7-13700K from intel. The way to apply it is the one that we personally have always used and it has given us the best results; You already know that there are many theories about what is the best method to apply thermal paste, but in our experience the one that has given us the best result has always been to apply thermal paste with the size of a grain of rice and spread it with a card or similar.