E-TECH Headlight Lens Restoration Kit

Such kits vary in terms of what you get. The most comprehensive headlight restoration kit will have a number of sanding pads, a polish, a sealant and perhaps a buffing cloth, too. Some more basic kits will provide just the sanding discs, polish and pads. Liberally spray your headlights with water and then carefully use the sanding pads to work those defects out. Alright, so we’re gonna start with a 500 grit sandpaper. You can do this by hand or with a power sander. I have an air sander here that I’m using, 3m Palm Sander

The Best Way to Clean Your Headlights

The headlights are coated in a UV protective layer in the factory. This is a specialized solution that absorbs into the polycarbonate surface in combination with heat treatment. It is not a clear coat. Using a solvent or abrasive on your headlights will compromise this protective coating. If the factory protectant layer is still intact I would just recommend a light polish with a 3000 grit sandpaper and a light compound I like to use from 3m

If you find that the plastic covering on your headlights is cloudy, yellow or showing other defects then we’d batteries? Join the Halfords Motoring Club today to access a range of amazing benefits and discounts that are reduce your visibility at night, it’s really important to make sure your headlights remain in a good condition. Sanding. All the kits above come with a range of sanding pads with varying degrees of abrasiveness. Follow the instructions in your kit and work your way through the sanding pads, starting with the most abrasive through to the least. Both the sandpaper and headlights should be wet during the sanding process to keep the plastic cool and prevents grit build-up as you sand. Take your time and be fussy. So we’re just gonna go over this thoroughly with a 500 grit sandpaper until you’re sure you have all the area covered evenly. As you do this you can see all the oxidation lifting off of the headlights. Then we’re gonna move on to the 800 grit sandpaper and do the same process. Then from 800 grit we’re gonna go on to the 3000 grit and you’re probably gonna want to spend the most time on the 3000 grit cuz this ensures you get all the scratches out from the 500 and the 800 grit sandpaper out of the headlights. It’s gonna ensure a nice smooth finish.I’ve seen other YouTube videos where they sand them down and I’m spraying with a clear coat highly not recommended The right way to fix oxidized Plastic headlights Sealant is a must too. In the same way that you apply a paint sealant or wax to polished paintwork to protect it, a sealant must be applied to headlights after using the polish. There may be a kit you quite like but does not possess a sealant but don't be concerned about this because you can buy appropriate sealants (recommended below) separately.

I’ve done this process several times. When we’re done I’m gonna use a lens and hard plastic cleaner to buff out the headlight and then I’m going to use a lens and polished protector Protecting around The Headlight Protecting around the headlight Would just spraying with very fine oil like WD40 not do a similar job ! Whats supposed to be in it / so good about it ?

Try Out Your Fresh Clear Headlights!

The common arguments against clear coats are generally two-fold: It interferes with the light refraction and can be more difficult to deal with in the future. Toothpaste can come in handy in restoring your headlights and getting rid of the fog that has settled on it. However, it is to be noted that you can only do this when your headlight is only slightly foggy and not when it is seriously yellowish and colored. With your vinegar solution contained in a spray bottle, gently apply the solution on your Headlight lens. Make sure you spray the entire area of your Headlight cover and allow it to soak for about 5 mins. Leaving the solution to stay for some minutes before washing, allows it to melt every grim. Thus, making it possible for you to achieve a sparkling appearance. Headlight Restoration DIY Preparation And Protection That Will Last OK Like the title says be talking about Headlight Restoration DIY Preparation And Protection That Will Last Apart from the 2-in-1 Turtle Wax product, the kits above follow the same procedures for restoring degraded headlights. Once you have everything you need, you will need to: