Joined in 2023 
82 
63 About this deal
Another option is using a pair of diagonal cutting pliers, also known as wire cutters or dikes. These pliers have a cutting edge that can be used to slice through the insulation of a wire. Once the insulation is cut, you can use the pliers to grip the insulation and pull it off. This method can be effective for larger wires, but it may not provide the same clean and precise results as wire strippers. When working with tools, safety is always a consideration, and wire strippers for your electrical project are no different. The following features add safety: This stripper is designed to both cut and strip 8 to 20 AWG-sized solid wire and stranded wires between 10 and 22 AWG. It’s able to strip smaller gauge wire with a minimum of damage because of the precision-machined stripper holes. It also uses a tension loader that doesn’t need to clamp the wire with excessive force, which also helps avoid breaking wires. Tool constructed of rigid polyurethane reinforced with carbon fiber providing excellent strength at 40% the weight of metal hand tools Handle grip: A comfortable grip is important if you’ll be using the wire strippers for long periods of time. A poor grip can lead to blisters and cramps by the end of the day.
Most wire strippers have rubber coating over their handles to provide a comfortable, nonslip surface for all-day use without causing pain or discomfort. The higher the quality of the tool, however, the better the rubber used for these handles. In many cases, manufacturers use silicone, as it’s soft to the touch and less likely to slip off the end of the handles. Using wire strippers may seem straightforward, but there are some common mistakes that can lead to frustration and even damage to your wires. By being aware of these mistakes and avoiding them, you can ensure that your wire stripping process goes smoothly and effectively. The Irwin Vise-Grip Self-Adjusting Wire Stripper takes the guesswork out of stripping wire: Just insert your wire into the jaws, squeeze, and voila! Perfect stripped wire without a bit of effort on your part. You can strip insulated wires that are 10 to 24 AWG, and cut or crimp insulated or non-insulated wires as well. There's also a stop setting to control the length of your strips. Note that for 22- or 24-AWG wires, there's a micro-adjust knob for the most precise performance in stripping these very thin wires. Convy’s Adjustable Automatic Cable Wire Stripper is marketed as an automotive wiring tool that saves time when wiring sound systems. Insert the wire into the correct notch, a few inches in, and close the jaws of the stripping tool a few inches from the end of the wire. If you have selected the correct gauge, the tool should cut through the insulation or sheath easily without damaging the core. Do not apply too much pressure to the handles
Wire gauges: Smaller wire strippers will have notches for the most common wire gauges, while larger strippers will handle the less common sizes, too. Make sure to compare the gauges a pair of strippers can fit to the wire sizes you know you’ll be cutting. Wide Compatibility: The electric motor powers drill-driven technology, while the adjustable blades and rollers fit all wire sizes with diameters from 1.5 mm (0.06”) up to 25 mm (1”). Strip the wire: Once you have rotated the wire strippers around the wire a few times, gently pull the strippers away from the wire. The insulation should come off easily, leaving the bare wire exposed. Clean them regularly: After using your wire strippers, it is essential to clean them to remove any dirt, debris, or residue that may have accumulated. You can use a brush or a cloth to wipe away any particles. Avoid using any harsh chemicals or solvents that can damage the tool. When wiring only one or two outlets, comfort might not be much of an issue when choosing a wire stripper. However, those with a full day of wiring ahead will want a comfortable set of strippers with nicely coated handles.
Although there are no tests or certifications for precision and accuracy, purchasing a tool from a recognized manufacturer that sells quality tools will help ensure that strippers will do their job accurately. A stripper that’s used properly can last a lifetime, and a drop of oil every now and then can help maintain smooth opening and closing. Features Some of the different types of wire stripper are explained in more detail below: Manual Wire Strippers Precision Wire Strippers: Precision wire strippers are designed for delicate wires and electronic components. They have a narrow stripping profile and provide precise control for stripping very thin wires without damaging them.We made sure to select tools with AWG ranges of 10 to 18 gauge or 10 to 24 gauge to accommodate a variety of wire sizes. Plus, we added a couple of cable strippers to the mix. These may seem like simple, standardized hand tools, but there are actually a few important features that set one wire stripper apart from another. Some are designed to do repetitive stripping fast, and others are intended for repair work that requires care and versatility. Below are the key features to think about when shopping for a modern set of wire strippers. If you often work with delicate, small wires, such as those used in electronic devices, then you'll appreciate the accuracy of the Jonard Tools WS-5 Adjustable Wire Stripper, which lets you strip or cut solid or stranded wire from 10 to 30 AWG. That means you can use the same wire stripper for most household electrical repairs, as well as working on your electronic devices. This wire stripper has an adjustable screw that lets you set the tool to just the right size for the wire. It also has a looping hole for solid wire. LaceLok® LaceLok® Cable Lacing Fasteners are used as secondary support for cable and wire bundling. Developed to replace cable ties and hand tied lacing tape, LaceLok® provides an ergonomic solution for consistent bundling with unrivaled strength and superior performance.
Whether the user needs a basic or professional-grade wire stripper, there is an array from which to choose. Ahead, learn what to consider when shopping for the best wire stripper and find out how the following tools earned a spot in this lineup based on our hands-on tests.
Order Approval
Laser wire stripping tools are a high-end alternative to conventional insulation removal solutions and are favoured when highly precise work is required. This could include cabling with an exceptionally narrow diameter, unusually tough insulation material, or cabling that is very specialist, such as cabling for use with medical equipment.
This stripper works with 10- to 20-gauge wire, which is ideal for most home projects. Plus, we could shear off the tip of a small 6-32 copper screw without exerting a lot of pressure on the handles; the Greenlee will also shear 8-32 sized screws. The slide-on nonslip grips proved to be very comfortable. By avoiding these common mistakes, you can ensure that your wire stripping process is efficient, safe, and produces the desired results. Take the time to familiarize yourself with your wire strippers, follow the manufacturer’s instructions, and prioritize safety to make the most out of this essential tool. Replace worn-out parts: If you notice that any parts of your wire strippers, such as the blades or the insulation grips, are worn-out or damaged beyond repair, it is important to replace them. Using a tool with worn-out parts can compromise your safety and the quality of your work. We tested each of the functions on every tool, which included the ability to cut wires, shear screws, and crimp electrical connectors to the ends of wires. We awarded points based on a rubric for how well each function worked during testing. We also graded the tools based on how comfortable they were to use, whether they required assembly, and whether they offered automatic, self-adjusting features.
The final step involves the removal of the wire insulation. To do this pull the wire stripper towards the open end of the wire. This should pull the insulation off the wire with ease! There are numerous types of cables. Some of the most commonly used cables in the typical home include: Laser radiation emitted by the tool vaporises the insulation material, but the inner components are highly reflective and so are unaffected by the standard beam. If the cable includes any metal shielding, a different type of laser can be used for cutting. Plumbing: Although wire strippers are primarily used for electrical work, they can also be handy in plumbing projects. Whether you are working with copper pipes or PEX tubing, wire strippers can help you remove the outer layer of insulation or coating. This allows you to make proper connections and ensure a leak-free plumbing system. Spring-loaded: A spring-loaded handle is another feature that makes it more comfortable to use wire strippers for lengthy work sessions. This is especially useful if you want to be able to use the tool with just one hand.
Great Deal 
New Comment