SHEL Sensor H&T WIFI TF wh

Product Information

switches/energy/shelly_em.yaml - platform: mqtt name: "EM - Relay" expire_after: 604800 qos: 1 command_topic: "shellies/shellyem-/relay/0/command" state_topic: "shellies/shellyem-/relay/0" value_template: {{ 'on' if value == 'on' else 'off' }} # Test for capturing 'overpower' state - platform: mqtt name: "EM - Phase A - Reset Totals" expire_after: 604800 qos: 1 optimistic: true payload_on: "reset_totals" payload_off: "" command_topic: "shellies/shellyem-/emeter/0/command" - platform: mqtt name: "EM - Reset Device Data" expire_after: 604800 qos: 1 optimistic: true payload_on: "reset_data" payload_off: "" command_topic: "shellies/shellyem-/command" Shelly 3EM ¶ If the BUTTON TYPE of the switch connected to the device is set to momentary or detached switch, the integration creates an event entity for this switch. You can use this entity in your automations. Event entities (generation 2) If you have external temperature or humidity sensors connected to the Shelly 1PM, you can also read their values over MQTT. Temperature ¶ Once the Gen 2 become more readily available, and I get my hands on one or more of them, I may make a new post about the changes. Configuration file structure ¶ If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events

Shelly Plus Add-on is compatible with most Arduino sensors! Use its digital or analog inputs to measure your desired parameters and create complex automation scenes based on the sensor data.These binary sensors allow you to create automations for a long-push on the connected button, but also give you some insights on the device state. The Shelly relays allow you to toggle one or more channels on/off, give you the switch state and may give you info on power consumption and device temperature. Just note that the 2.5 has 2 switch inputs and 2 relay outputs, so you’d need to duplicate configs specific to those, one linked to input/relay 0 and to other to input/relay 1. Needless to say, once that’s all done, the Shelly H&T appears just like any sensor in HomeKit. As this device has two sensors, it initially shows up as just one tile, as standard in iOS 13, but you can, of course, separate them to show individual tiles for each sensor in the Home app.

Also note the small difference in the model naming when entering the MQTT topic for the Shelly Plug and Shelly Plugs S ( shellyplug / shellyplug-s). Light vs Switch setup ¶

Shelly Humidity & Temperature Sensor H&S Smart Home Automation WiFi Solution 

platform: mqtt name: Rolling Shutters - Calibrate command_topic: shellies/shellyswitch25-/roller/0/command payload_on: rc - platform: mqtt name: Rolling Shutters - FW upgrade command_topic: shellies/shellyswitch25-/command payload_on: update_fw binary_sensor: Depending on how a device’s button type is configured, the integration will create binary sensors corresponding to those inputs. binary sensors are not created when the button type is momentary or momentary_on_release, for these types you need to use events for your automations. Binary input sensors (generation 2) It automatically recognizes new Shelly devices talking to the MQTT broker (after the Shelly’s been configured to use MQTT) and creates devices and entities for each of them. I won’t write a tutorial on doing this, as all required information can be found in the ha-shellies-discovery documentation. Irrigation only when needed - Having a beautiful garden is not an easy task and automating your irrigation system can save you time and optimize your costs. Together with a soil moisture sensor, Shelly Plus Add-on can trigger Shelly Plus 1 to turn on the irrigation only when necessary, always skipping the rainy days.