Easy Joint Paving Jointing Compound 12.5kg – Buff Sand

Product Information

Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money. Smooth the joints:when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool EASYJoint is the UKs top selling paving jointing compound, favoured by professionals and DIY installers all around the world. Since beginning our business, we have relied on polymeric sand as the product of choice for our jointing compound. It is not without its cons, but as long as you follow the directions carefully and the conditions are right, polymeric sand is a good option for paver joints. However, there are other choices that have their applications as well. In this article, we will be highlighting a semi-permeable jointing compound from Azpects called EASYJoint. Jointing compound gives you an easier, faster way to seal the gaps between paving than traditional mortar joining. With no mixing required, jointing compound can typically be used in all weathers. Finish your patio, driveway, pathways and paved areas to perfection with our great value products from well-known brands, in a choice of colours and sizes.

Wet the paving, brush in the compound, then strike the joints for a smooth finish and stronger, durable joint. Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnesThat being said, there is no haze issue that you may get with polymeric sand and it is a much easier product to install in terms of the potential for failure. It is most definitely the perfect product for the applications listed above and in some cases can be superior to polymeric sand as long as the base is free-draining. Unfortunately the delivery company will be unable to remove items from the pallet or take the pallet away with them and delivery will be made to the kerbside. Similar to the above systems, paver base panels have drainage holes in them and when installed with High Performance Bedding below, this system allows water to flow through it and into the subgrade following a slope out of the system. • Early or Late in the Season I found that the shower or vertical setting on the hose nozzle works well with the installation of this product. When finishing the joints, a jointing tool may smooth out the surface of the joints to give a more pleasant look to the finish. The product should sit 1/8″ below the surface of the paver or bottom of the chamfer, whatever is lower. Truly an all weather jointing compound: An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after application

At approximately three times the price of polymeric sand, this is not a product that you decide to use after pricing a project. It is not a spontaneous alternative to polymeric sand if on the day of the project it is raining and you then decide to use this as an alternative. It is definitely something you would want to price into the job to ensure that you are not eating into your profits. It also takes about twice the amount of time to install when compared to polymeric sand and is more difficult to install without more than one person. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish. No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water. – There is no waste with our jointing compound, EASYJoint is an environmentally friendly product.Very fast to use: The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology. It assists the paving grout to compact into the joints so there is no need to 'strike' or 'tool' the joints unless you want a smooth finish. The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods. EASYJoint is the UK's top-selling paving jointing compound, favoured by professionals and DIY installers all around the world. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. The EASYJoint family now has 9 products within the range. EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example.