Joined in 2023 
82 
63 About this deal
Selects between using internal 5V (supplied by connected Duet 2 WiFi/Ethernet) or external 5V (supplied to EXT 5V header). Boost productivity and work anywhere with the DUEX portable monitor, providing dual-screen capabilities. The duex.estop pins are routed through the I2C expander on the DueX. The exp.e[x]stop pins on the Duet expansion header become the CS pins on the DueX temp daughterboard connector. If everything is working so far, apply 12V or 24V power and proceed with testing other devices you have connected. If the VIN to the DueX goes below the minimum level (about 10V) then the stepper drivers on the DueX will stop functioning, but you won't be warned about it, because VIN to the DueX is not monitored separately.
If we talk numbers, the Duex Pro displays FHD resolution on a 12.5-inch, and the quality seems apt with text appearing sharp and clear. However, you might find it a tad different compared to the color scheme on your laptop. The Duet 2 WiFi and Ethernet also provides a connector specifically for a Z probe. This supports simple switches, boards producing analog outputs (at 3.3 V levels) and boards providing analog outputs that require an on/off modulation signal. Heaters: Each heater from E2_HEATER to E6_HEATER has a red indicator LED. When lit, the heater is on.If you have a slightly bigger laptop, the Trio Max sliding laptop monitor might prove to be the best option out there. This one is 14-inch and, like its counterpart above, mounts on the laptop lid. The primary advantage that it brings to the table is that you can attach an additional monitor, thereby upping the display count to 3. Cool, right? The Trio and Trio Max offer an innovative, easy and personalized setup for all of your needs. Only 3 steps and it's ready to extend your vision. Both Duex® 868 and standard Duex® can also be supplied in a lighter 6/5/6 configuration, however IAE would always recommend using heavier 8/6/8 panels in a sporting environment. The maximum recommended power input voltage is 25V. This is a permanent limitation, because the TMC2660 drivers are rated at 30V when supplying power to motors. ¶ Firmware notes The DueX5 is an expansion boards for the Duet 2 Wifi and Ethernet. It provides up to 5 additional stepper, heater etc channels to allow for 3D printers or other machines with more axis, multiple drivers per axis, tool changers etc.
The DueX 5 is an expansion board for the Duet 2 Wifi and Ethernet. It provides up to 5 additional stepper motor drivers, 5 extruder heater outputs, 5 endstop inputs with indicator LEDs, 6 additional controlled fan outputs, 5 thermistor inputs, support for 2 more thermocouple or PT100 daugther boards, and optional 5V external power input for powering servos and fans to allow for 3d printers or other machines with more axis, multiple drivers per axis, tool changers ets. Further underscoring the use in an office or sales work environment, the DUEX screen series provides the ability to flip the screen to face a person in front of you, which could be quite useful in a meeting or presentation. You do not need to connect anything to the 5V_EXT_POWER connector unless you want to supply external 5V power to power servos and fans. To disable the internal jumper, gently remove the copper ring of the jumper using a 1mm drill bit and confirm its removal by testing between the two pads using a multi-meter; there should be no connection.
Contents
When you need the screen to be extended, all you need to do is connect the monitor to your laptop, pull it towards yourself, and get going. Moreover, the display quality is quite decent, and the lightweight form factor means that it doesn’t add much heft to your laptop bag. Sounds exciting, no?
The DueX2 and DueX5 are supported in firmware 1.16 and later. You must upgrade the firmware on your Duet 2 WiFi/Ethernet if you are using an earlier version. ¶ Compatibility deux”, in Trésor de la langue française informatisé [Digitized Treasury of the French Language ], 2012. The MCU driving the Duet boards has considerably more inputs and outputs than are used on the main board. Many additional lines are available on the expansion connector.
Any questions?
Powerful Connectivity – Features two USB-C ports with pass-through charging, so you can charge devices whenever and wherever you want. Changed the test points for D7,8,9 to a Molex KK header, added an endstop pin and ground to the header as well to make it easier to connect the fault line of the external driver to this header as well. Lightweight and durable, the DUEX is created with ABS and aluminium so it can withstand the wear and tear of transporting a laptop around. It’s also energy efficient and specially designed to reduce battery drain from a laptop. Optimal colour temperature and brightness minimises the emission of blue light from the display so users can work and play comfortably with less eye fatigue. Giuliano Moschini has created a model based on the Duet 2 WiFi model for the Duet 2 Ethernet available here ¶ Physical connections ¶ Wiring diagram ¶ Revision v1.0 and later
more extruder heater outputs and thermistor inputs, 2 more PT100/thermocouple daughter boards (4 channels), offered by optional DueX5 expansion board The best part of having a portable sliding monitor is its good portability. Since most of the monitors mount via magnets, they stay anchored to it, and you can carry them along with your laptop with ease. On top of that, thanks to the housing, you may simply stand the DUEX Max upright in portrait mode. Funnily enough, this scenario immediately felt like it has a lot of potential as that second screen in a more stationary setup; say, your home office or permanent desktop. The G-Sensor does not trigger for this state, so you have to manually set the screen up within the host operating system. The Mobile Pixels DUEX is a productivity tool for those who want the freedom to multi-task anywhere. Attached by magnets, the screen slides out easily when needed making it perfect for anyone who is working, presenting, studying, gaming or even watching movies on the go.
Navigation menu
thermistor/PT1000 inputs. Support for two temperature daughterboards for up to 4 PT100 or thermocouple sensors.
Great Deal 
New Comment