Corsair iCUE 4000X RGB Tempered Glass Mid-Tower ATX Case (Tempered Glass Side and Front Panels, RapidRoute Cable Management System, Spacious Interior, Three Included 120 mm RGB Fans) White

Product Information

After finally finding a review on mmorpg that installed a LL120 as exhaust, I can confirm that other fan types won't work. It didn't even light up period.

CORSAIR iCUE Software | Drivers | Software | CORSAIR

The side panels are both screwed on and a little fidgety to remove, but not exceedingly so. As with the top panel, I'm inclined to believe this is for the best, as it helps to reduce the chance of the panels accidentally falling off on their own. The two rainbow effects & setting a static colour (my preferred effect) work fine (see included picture), but anything requiring a sequence don't work properly as there's no way to arrange the fan sequences correctly in the iCue app. Just thought I'd add my own experiences to this thread. I built my new 3700X PC a few weeks ago around a 4000X as well in white. It was designed for Tokyo, Japan, by the Taisei Corporation in 1995 as a futuristic environment combining ultra-modern and technological living and interaction with wildlife and nature. [2] [3] Methods of transportation within the X-seed would most likely include Maglev trains. The X-Seed 4000 was projected to be twice the height of the Shimizu Mega-City Pyramid at 2,004 metres (6,575ft).The front of the Corsair iCUE 4000X RGB is tempered glass held with four pins similar to cabinet latches: users just pull on the panel and they will release. It takes a bit of effort to pull the panel loose, but this method makes it easy to clean the removable dust filter for the front fans. The filter has a pull tab at the top and is held in place by a couple rare earth magnets, while the bottom is held in place by two tabs that allow the filter to swing and then lift out. Removing the filter allows it to be rinsed clean, and is necessary for any work being done on the front fans. Show off your components and RGB lighting, with dedicated front ventilation channels for ample airflow. Also stashed away beneath this door are three 2.5-inch drive mounts and a pair of fan controllers, including one of Corsair's iCue Lighting Node Core controllers. Each fan controller is able to control up to six fans, and the iCue Lighting Node Core can connect to a USB 2.0 header on your motherboard for software control of the lighting of connected fans. Excuse the cable mess around the Wraith cooler. I'll be cable managing properly once I get the H100i :) Contemplating on getting some sleeved cables too.

Corsair iCue 5000X RGB - Review 2021 - PCMag UK Corsair iCue 5000X RGB - Review 2021 - PCMag UK

AWD Corsair iCUE 4000X RGB VISION Ryzen 5 5600X - GIGABYTE RTX 3070 VISION 8GB OC Desktop PC for Gaming With the drive cage in its starting position in the middle of the case, however, adding a power supply is nearly impossible. For this build, I used SilverStone's fully modular ST75F-PT power supply, and ran into trouble almost immediately. Without moving the cage, I could fit the power supply without any cables attached to it into position, but the space between the PSU and cage was too cramped for me to then add cables to the PSU. The iCUE 4000X RGB has removable storage consisting of two 2.5in drive trays, and a 3.5in drive bay with trays for two 3.5in or 2.5in drives. All six fan mounting locations can take 120mm-width radiators, while the front and top fan bays can take up to two 140mm-width fans and up to 280mm radiators. Using a 280mm radiator in the top will limit your RAM choices to Corsair Vengeance LPX or similar profiles. RGB lighting is controlled by a preinstalled Corsair Lighting Node Core with six slots. The first three are already configured for the included RGB fans. Cable management benefits from cable trays with Velcro straps, cable glands, and a plastic shield that helps to hide cable runs.With a CPU boost speed of 4.6GHz and the brand-new Nvidia RTX 3070 8GB GDDR6X graphics card at the heart of the system, you won't miss a beat of the action, The side panel is a large tempered and tinted glass panel, adhered to a metal frame for mounting. It is held on by four loops that catch hooks on the case, and two thumb screws on the other end. The tint is very dark, hiding the contents well until any lighting is turned on inside! The iCUE 4000-series comes equipped with the iCUE Lightning Node Core smart control module, but it does have one fatal flaw. The module only seems to recognize fans within one product family. This is great news if you have other SP RGB Elite fans."