Briwax 400g Wax Polish - Dark Oak

Product Information

If you do happen to pick up a copy (which of course I would truly appreciate), please leave me a review! Intensive colours allow the wood’s natural grain and character to remain visible after the first coat, however these characteristics become hidden after the second coat. Transparent colour (one coat): with Osmo Flat Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply very thinly to the clean and dry wood surface along the wood grain and spread well.

For application on antique or fine furniture apply the wax with a clean white lint-free cloth and allow to dry. You can see that it’s easier to work with dark wax after you apply clear wax to your furniture first. Whether looking to create a limed effect on oak or other interior hardwoods or wanting a multi-purpose wax for creating striking effects, here you will find an extensive selection of waxes for use on interior materials.These 13 tips on how to make a small bathroom feel luxurious will be the perfect guide for any bathroom renovation! Can i use the clear wax as the “sealer”, followed immediately with the dark wax or do i need to seal it with a traditional sealer before i use the clear and dark wax to antique it? Applying the product too generously and insufficient ventilation lead to delays in drying time and the typical smell of oil. Beeswax Paste with Pure Turpentine is a traditional paste wax that nourishes wood and gives an authentic finish to furniture.

For application on lacquered wood, apply the wax with a clean white lint-free cloth and buff off almost immediately with a clean white lint-free cloth - Mylands Traditional Waxes can be used over virtually all interior wood finishes. Two coats can be applied on wooden furniture, doors and joinery, but only one coat on flooring – as a second coat of Osmo Polyx®-Oil is required. Make sure to buff that section first before moving on to another section (example: wax the top of the desk first then buff before moving on to the legs). The following are suitable for use under this range of waxes: Light Fast Stains, Non Fade Ground Stains, Earth Stains and Waterbased Stains. When using 3111 White as the first coat on flooring, a second coat of 3040 White from Polyx®-Oil Tints is recommended to avoid yellowing.Annie Sloan’s dark wax is a very good product, but its consistency is a little hard compared to some other brands.

They can also be applied over shellac based sealers such as 2000 Pale Shellac Sealer Basecoat or Lacacote Wood Sanding Sealer – the latter being a higher build shellac based sealer, ideal for use under wax as a quick and easy finishing system.For furniture, joinery and children’s toys – a second coat can be applied for an opaque colour tone, hiding the wood’s character. I hope this guide on how to use dark wax on furniture has helped you to feel confident to try it yourself! Today’s contributor is Patricia from The Wood Spa and she is a sharing a tutorial on how to use dark wax to age furniture.

Quick to dry, the Original Wax can be applied directly onto timber or onto Briwax Shellac Sanding sealer, too give your pieces a stunning natural oak finish. Otherwise, for furniture and joinery a second coat of Wood Wax Finish can be applied for a more intensive colour tone.Again, you can wipe off as much or as little wax as you’d like and can go back and add more as long as you started with clear wax first. Other woods treated with a varnish, lacquer or other surface coatings must be completely sanded before use.