FLOPLAST Waste Pipe Boss Adaptor - Solvent 50mm (56mm) - Bag of 2

Product Information

Note: Polypipe soil and waste systems are suitable for short intermittent discharges of hot and cold water in normal domestic installations in the UK.

FloPlast operates quality and environment management systems which have been assessed by BSI and comply with the requirements of both BS EN ISO 9001:2008 Certificate No. Comprehensive, integrated and modern range of products and systems for all soil and waste applications.

This solvent weld boss adaptor is used in conjunction with either an SP583 Short Boss Pipe, an SP581 boss pipe or an SP319 strap boss to connect a waste pipe into a 110mm soil pipe. Smith Brothers have joined forces with the UK’s leading manufacturer of plastic piping systems, Polypipe Building Services, together offering outstanding service and the best products available for any project.

Certified to BS4514 and EN1329, our soil and vent systems combine to provide one of the most comprehensive ranges available for the residential sector, providing everything you need for quick, easy installation and trouble-free performance; including push fit ring seal and solvent weld options, air admittance valves, fire protection sleeves, pan connectors, fixings and ancillaries. Remember, solvent weld joints cannot be separated when created – so you’ll be creating a permanent join. Manufactured in PVC-U with push-fit joints through an innovatively designed seal and snap cap system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

The off-centre nature of the adaptor allows it to be rotated before the solvent weld is created – so you can align your vent pipes neatly. We’ve recently updated our Privacy Policy to give you more detailed information about your rights and how we use your data.

FloPlast offer a comprehensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications.The three options are as follows – 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. First, you should make sure you select the appropriate solvent cement for the pipes you’re working with. The two pipes are connected securely using the adaptor by using solvent cement around the inside of of the boss fitting.