Joined in 2023 
82 
63 About this deal
Sometimes referred to as a kettle power lead the C13 connector has 3 pins, often found on PCs and TVs. C15 Power Cables (Hot Condition) UL certification E152635 covering YC-12 C13, YC-20 C15 and YP-32 C14 connectors. Note that the manufacturer's YC-20 label contains an error; the wire gauges (18, 16, 14) are repeated in the "current rating" column; the UL certification contains the correct values (10A, 13A, 15A). Retrieved 2014-09-24. Cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug and one non-rewirable connector, intended for the connection of an electrical appliance or equipment to the electrical supply".
You have 3 units that have "built-in" mains cords (i.e. the mains cables cannot be disconnected from the units) and you want to connect them to your power distributor/monitor ?Standard sheet C25 shows retaining device dimensions. Sheet C26 shows detail dimensions for pillar-type terminals, where the end of the screw bears on a wire directly or through a pressure plate. Sheet 27 shows details for screw terminals, where the wire is held by wrapping it around the head of a screw. For use in high-temperature settings (for example, electric kettle). Also used in some network appliances that provide PoE. In addition to the connections within the standards, as mentioned, there are possible combinations between appliance couplers and IEC interconnection couplers. Fitted with a flexible cord, the components become interconnection cords to be used for connecting appliances or for extending other interconnection cords or power supply cords. Xbox One Power Supply | Xbox One Console". support.xbox.com. Archived from the original on 2016-11-26 . Retrieved 2016-11-25. Similar to C13/C14 coupler, but unearthed. A C18 inlet accepts a C13 connector, but a C14 inlet does not accept a C17 connector.
a b "IEC 60320-3:2014+AMD1:2018+AMD2:2022 CSV | IEC Webstore". webstore.iec.ch . Retrieved 2023-05-13. Appliances can be used in another country easily, with a simple change of the power supply cord (including a connector and a country-specific plug). The power supply cord can be replaced easily if damaged, because it is a standardized part that can be unplugged and re-inserted. Safety hazards, maintenance expenditure and repairs are minimized. There is some public confusion between C13/C14 and C15/C16 couplers, and it is not uncommon for C13/C14 to be informally referred to as "kettle plug" or "kettle lead" (or some local equivalent). Pin temperature is measured where the pin projects from the engagement surface. The maximum permitted pin temperatures, are 70°C (158°F), 120°C (248°F), and 155°C (311°F), respectively (the higher temperatures are not applicable to interconnection couplers). The pin temperature is determined by the design of the appliance, and its interior temperature, rather than by its ambient temperature. Typical applications with increased pin temperatures include appliances with heating coils such as ovens or electric grills. It is generally possible to use a connector with a higher rated temperature with a lower rated appliance inlet, but the keying feature of the inlet prevents use of a connector with a lower temperature rating. The C13 connector and C14 inlet are also commonly found on servers, routers, and switches. Power cord sets utilizing a C13 connector and an E interconnection plug are commonplace in data centers to provide power from a PDU (power distribution unit) to a server. These data-center power cables are now offered in many colors. Colored power cables are used to color-code installations. [25] C15/C16 coupler [ edit ]
C15 Power Cables (Hot Condition)
Some electric kettles and similar hot household appliances like home stills use a supply cord with a C15 connector and a matching C16 inlet on the appliance; their temperature rating is 120°C (248°F) rather than the 70°C (158°F) of the similar C13/C14 combination. The official designation in Europe for the C15/C16 coupler is a "hot-condition" coupler. The C1 coupler and C2 inlet were commonly used for mains-powered electric shavers. These have largely been supplanted by cordless shavers with rechargeable batteries or corded shavers with an AC adapter. These cables are sometimes informally referred to as a "kettle cord" or "kettle lead", but the C13/14 connectors are only rated for 70°C (158°F): a device such as a kettle requires the C15/16 connector, rated for 120°C (248°F). One arbitrarily chosen example of a 1500W PSU with a C14 input is the Enermax MAXREVO 1500 W 80+ Gold. It manages to fit within the 15A input current limit because of its 80 Plus gold efficiency. The IBM Wheelwriter series of electronic typewriters are one common application. Three-wire cords with C13 connectors, which are easier to find, are sometimes used in place of the two-wire cords for replacement. In this case, the ground wire will not be connected.
Similar connector to C5/C6, but with a key ridge instead of an earthing conductor, withdrawn from standard. IEC 60309 specifies larger couplers used for higher currents, higher voltages, and polyphase systems. The C19 power cable is used in higher current applications such as power PDUs in data centres, it is an industrial type connector, larger than the C13 and C15. Schuko Euro Power Cables The first edition of IEC 320 was published in 1970 [2] and was renumbered to 60320 in 1994. [3] Terminology [ edit ]For use in very-high-temperature settings, such as some stage lighting instruments. Similar to C15/C16, but the top is narrowed to exclude the C15 cord connector.
Great Deal 
New Comment