Grandstream HandyTone HT801 ATA

Product Information

Select the menu option 15 to choose firmware and configuration upgrade protocol between TFTP, HTTP and HTTPS, FTP and FTPS. Default is HTTPS.

The Grandstream HT801 is ideal for situations in which multiple analogue phones (or a loud bell) need to be connected to a VoIP phone service (see description below for more information). The HT801 is designed for easy configuration and easy installation, to connect your HT801, please follow the steps below:The HT801 supports 1 FXS port which can be configured with 1 SIP account, while HT802 supports 2 FXS ports which can be configured with 2 SIP accounts. Please refer to the following steps to register your accounts via web user interface. If there's more than one VoIP phone/device on the same local network, assigning each different local UDP ports will avoid port conflicts.

Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone then hang up. Finally, if experiencing downtime is a concern, Grandstream’s HandyTone Series includes a failover SIP server, which automatically switches to a secondary server if the main server loses connection. Automatic provisioning makes system setup a manageable process for those with varying degrees of technical knowledge.GXW42xx V2 has "V2" printed for model name. For example, "Model: GXW4216 V2". If the model name doesn't have V1 or V2 printed, the device is GXW42xx V1. Insert a standard RJ11 telephone cable into the phone port and connect the other end of the telephone cable to a standard touch-tone analog telephone.

Unconditional Call Forward: Dial “*72” and then the forwarding number followed by “#”. Wait for dial tone and hang up. You can place a call on hold by pressing the “flash” button on the analog phone (if the phone has that button). For GXW42xx V2 device on 1.0.3.1 or higher version to upgrade to 1.0.17.1, the HTTP firmware upgrade path is:Dial the number directly and press # (“Use # as dial key” must be configured in web configuration). The following guide will be a useful guideline to help configure Grandstream adapters with your sipgate account and applies to all adapters from the HT series, e.g. HT 801 / 802 / 812 / 814 etc. Although the Grandstream HT801 adaptor can be connected to any VoIP phone service, we supply it pre-configured for connection to the Premitel VoIP Phone Service. Note: Please use the 1.0.9.x firmwares below for GWN7600/7600LR/7610with GWN7000 1.0.9.4deployment. Phone A presses Flash (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

The Ethernet LED lights up when the HT801/HT802 is connected to your network through the Ethernet port and it flashes when there is data being sent or received. Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds;

BYO modem/router

In situations where only one analogue phone (or a multi-handset cordless phone base) is to be connected to the VoIP phone service then the lower cost Yeastar TA100 may be a better option.